Shock - Absorbing Durable Silicone Protective Case for Lens
Item specifics
- Color (General)
- Custom
- Material
- EPDM or other rubber materials: NBR, CR, IIR
- Length
- Custom
- Dimension
- Custom
- Temperature Range
- －45°C—125°C
- Shore Hardness
- 50-95 Shore A or customize
- Tensile strength
- 5～12Mpa
- Elongation at break
- 400%
Review
Description
Silicone Protective Case for Lens Introduction
The case acts as a shock absorber, reducing the impact of accidental drops. It also forms a barrier against dust, dirt, and moisture.
Customization Options
RESRUB could produce the tubing with enough length to fully connect any size loop.
And available to custom colors, such as black, white, pink, etc.
Material Advantages
Crafted from high - grade silicone, this case is flexible, conforming to different lens shapes without causing harm. Its durability ensures it can withstand daily wear and tear, including minor knocks and scratches. Plus, being non - toxic and hypoallergenic, it's safe for both the lens and the user.
Silicone Protective Case for Lens Properties:
| Length | Customizable | OEM/ODM | Available |
| Reinforcement | Outer Layer Polyester Braiding for Enhanced Strength | Lead Time | 10 Days |
| MOQ | 100 Meters | Application | Gaming Case |
What size tubing for liquid cooling?
The most common inner diameter(ID) sizes are 1/4" and 2/9". The outer diameter(OD) of tubing is the measurement between the outer wall of the outer wall of the opposite side. Common OD sizes for PC tubing are 1/2", 3/7", and 4/9". The wall thickiness of PC cooler tubing is the difference between the OD and ID.
what is coolant tubing made of?
EPDM is the typical tube material because of its strong resistance to heat, hot water, and eth ylene glycol, the most common antifreeze. In some cases, SBR or NBR may be used instead.
Can you use silicone tubing for coolant?
As such, silicone hose could be used in water coolant systems. However, EPDM tubber hoses are also suitable for a variety of water coolant applications and can be more cost-effective than other materials when large quantities are required.
Item | Silicone Protective Case for Lens | |
Size | Customize | |
Material | EPDM or Silicone | |
Hardness | 50-95 Shore A or customize | |
Color | White or customize any color | |
Density | 0.6-1.45/cm³ | |
Temperature resistant | －45°C—125°C | |
Tensile strength | 5～12Mpa | |
Elongation at break | 200～900% | |
Lead time | 3 days for sample, 15 days for batch order | |
Packing method | Carton/ PE bag / Wooden pallet / Paper roll | |
Price tip | The price above is for your reference, final actual price depends on your design,material request, surface treatment, order quantity, package request, etc. | |
