Weatherproof Rubber Sleeve for Automotive Clamps UV-Resistant and Corrosion-Proof for Long-Lasting Vehicle Protection
Item specifics
- Color (General)
- Custom
- Material
- EPDM or other rubber materials: NBR, CR, IIR
- Length
- Custom
- Dimension
- Custom
- Temperature Range
- －45°C—125°C
- Shore Hardness
- 50-95 Shore A or customize
- Tensile strength
- 5～12Mpa
- Elongation at break
- 400%
Review
Description
Rubber Sleeve for Automotive Clamps Introduction
This rubber sleeve provides enhanced protection for automotive clamps. It effectively reduces vibration and noise, which is vital for a quiet and comfortable driving experience.
Customization Options
RESRUB could produce the tubing with enough length to fully connect any size loop.
And available to custom colors, such as black, white, pink, etc.
Material Advantages
Made from high - quality rubber materials, it offers excellent flexibility and durability.
Rubber Sleeve for Automotive Clamps Properties:
| Length | Customizable | OEM/ODM | Available |
| Logo | Customer Logo Available | Lead Time | 10 Days |
| MOQ | 100 Meters | Application | Gaming Case |
Installation precautions
When installing the rubber sleeve of the automobile fixture, it is necessary to clean the surface of the fixture first to ensure that there is no oil, rust and impurities, and cut the rubber sleeve accurately according to the size of the fixture. During the installation, the rubber sleeve should be evenly inserted into the fixture to avoid distortion and wrinkles. If it is necessary to glue and fix, the glue should be evenly applied and pressed firmly to prevent it from falling off and affecting the use effect.
What is the purpose of a rubber sleeve on automotive clamps?
The rubber sleeve serves multiple crucial functions. Firstly, it acts as an insulator, preventing electrical conductivity between the metal clamp and other components. This is especially important in automotive electrical systems where short - circuits need to be avoided. Secondly, it provides cushioning. Automotive components are subject to vibrations while the vehicle is in motion. The rubber sleeve absorbs these vibrations, reducing wear and tear on both the clamp and the clamped component. Thirdly, it protects against corrosion.
What if the rubber sleeve I purchased is too large or too small?
If the rubber sleeve is too large, it may not provide the necessary insulation, cushioning, or protection. In some cases, you can try to trim the excess material carefully with a sharp utility knife, but this may affect its performance. If it's too small, it will be extremely difficult to install and may not cover the entire area of the clamp as required. In either case, it's best to purchase a new rubber sleeve with the correct dimensions.
Can I install the rubber sleeve on the automotive clamp myself?
Yes, Clean the surface of the clamp thoroughly to remove any dirt, grease, or rust. This helps to ensure a better fit and adhesion if the sleeve has an adhesive lining.
Item | Rubber Sleeve for Automotive Clamps | |
Size | Customize | |
Material | EPDM or Silicone | |
Hardness | 50-95 Shore A or customize | |
Color | White or customize any color | |
Density | 0.6-1.45/cm³ | |
Temperature resistant | －45°C—125°C | |
Tensile strength | 5～12Mpa | |
Elongation at break | 200～900% | |
Lead time | 3 days for sample, 15 days for batch order | |
Packing method | Carton/ PE bag / Wooden pallet / Paper roll | |
Price tip | The price above is for your reference, final actual price depends on your design,material request, surface treatment, order quantity, package request, etc. | |
