Weatherproof Rubber Seal Strip for Automotive Steel Plate UV-Resistant and Corrosion-Proof for Harsh Driving Conditions
Item specifics
- Color (General)
- Custom
- Material
- EPDM or other rubber materials: NBR, CR, IIR
- Length
- Custom
- Dimension
- Custom
- Temperature Range
- －45°C—125°C
- Shore Hardness
- 50-95 Shore A or customize
- Tensile strength
- 5～12Mpa
- Elongation at break
- 400%
Review
Description
Rubber Seal Strip for Automotive Steel Plate Introduction
Our Rubber Seal Strip for Automotive Steel Plate is suitable for all types of vehicle models, including sedans, SUVs, and commercial vehicles. The installation process is simple, and even car owners without professional skills can easily complete the installation. Choose our rubber seal strip to provide comprehensive protection for your vehicle, enhancing its overall performance and service life.
Customization Options
RESRUB could produce the tubing with enough length to fully connect any size loop.
And available to custom colors, such as black, white, pink, etc.
Material Advantages
Constructed from high - quality rubber materials, typically EPDM (Ethylene Propylene Diene Monomer), it combines remarkable flexibility with outstanding durability.
Rubber Seal Strip for Automotive Steel Plate Properties:
| Length | Customizable | OEM/ODM | Available |
| Logo | Customer Logo Available | Lead Time | 10 Days |
| MOQ | 100 Meters | Application | Gaming Case |
Technical Specification
When installing the rubber seal of the automobile steel plate, check the condition of the seal strip and the steel plate in advance to ensure that the size matches and the model is consistent; When installing, clean the steel plate, remove rust and apply primer, install correctly according to different fixing methods, and avoid excessive bending; After installation, check the seal, test for water leakage, and finally check the overall appearance and trim the excess.
What types of rubber are used for automotive steel plate seal strips?
Commonly, materials like EPDM (Ethylene - Propylene - Diene Monomer), silicone rubber, and neoprene are used. EPDM is popular due to its excellent weather resistance, ozone resistance, and long - term durability. Silicone rubber offers good heat resistance and flexibility, while neoprene provides good oil and chemical resistance. The choice of rubber type depends on the specific application and environmental conditions the seal strip will be exposed to in the vehicle.
How do I know if my car needs a new rubber seal strip for the steel plate?
Look for signs such as visible cracks, splits, or chunks missing from the seal strip. If you notice water leaks inside the car, especially around doors, windows, or the trunk, it could be a sign that the seal strip is worn out. Increased wind noise while driving can also indicate a problem with the seal. Additionally, if the seal strip has become hard and brittle or has lost its flexibility, it's likely time for a replacement.
What should I do if the seal strip is too long or too short for my car's steel plate?
If the seal strip is too long, you can carefully trim it to the correct length using a sharp utility knife. Make sure to measure accurately before cutting to ensure a proper fit. If it's too short, unfortunately, you may need to obtain a new seal strip that is the correct size.
Item | Rubber Seal Strip for Automotive Steel Plate | |
Size | Customize | |
Material | EPDM or Silicone | |
Hardness | 50-95 Shore A or customize | |
Color | White or customize any color | |
Density | 0.6-1.45/cm³ | |
Temperature resistant | －45°C—125°C | |
Tensile strength | 5～12Mpa | |
Elongation at break | 200～900% | |
Lead time | 3 days for sample, 15 days for batch order | |
Packing method | Carton/ PE bag / Wooden pallet / Paper roll | |
Price tip | The price above is for your reference, final actual price depends on your design,material request, surface treatment, order quantity, package request, etc. | |
